sliding angle

The frequency distribution of ratio Ω for a large amount of earthquake cases approximates to the Gaussian distribution with a mean value of Ω equal to about 0.092, which corresponds to the dominant sliding angle of about 60 °.

对于大量震例来说，比值Ω的频数分布近似于正态分布，其平均值约为0.092，相当于震源的优势错动角60&61°。

In the paper sliding-cutting angle and cutting angle were calculated, other major cutting parameters were given.

文中计算了滑切角,切割角等主要切割参数,给出了新型剖半机的主要技术参数.

The system can calculate the logging restricted zone due the soil protection adjacent to streams within a safe distance; or due to the land sliding critical angle of the deep slope.

系统可以根据在一个安全的距离内邻近溪流的土壤保护层或者陡坡地滑坡关键角计算出伐木的限制区域。

Based on the limit equilibrium theory and the hypothesis of planar sliding surface, a formula for calculating the angle of shear failure was deduced considering cohesion and cut slope angle.

基于极限平衡理论及平面滑裂面假定，在考虑土黏聚力及放坡角度的基础上，推导了平面滑裂面剪切破坏角的数学表达式。

Sliding off a 45-degree angle, the wind here is said to sing in soft whispers.

响沙湾的沙丘倾斜45度角，那里的风声像是在浅吟低唱。

The concept and definition of the sliding cutting angle of the working parts in agricul-tural machinery are described variously and even incorrectly at present.

目前，对农业机械工作部件的滑切角的定义不一致，概念不统一，甚至出现错误。

Because the grain is little in full tailings, angle of beach surface slope become very smooth near the gateway, and the flow is very slow. Remain the slowly sliding flow, so angle of beach surface is about 0.3%.

但由于全尾矿中这种颗粒少，离放矿口不远处的滩面坡度就变的很平缓，流速很慢，维持这种缓慢滑移流动的滩面坡度约为0.3%。

When the dipping angle of the slide surface is steep, the whole sliding will be predominant, which implies that load design could be determined by classical slice methods.

当滑动面倾角较大时，滑动效应占主导地位，抗滑桩的设计荷载可根据各种条分法来确定。

Research on Limit Angle in Maximum Pressure for Radial Sliding Bearing

向心滑动轴承最大比压处极角φ0的研究

Calculation of sliding neutral angle in deformation zone of ring rolling

环件辗扩中变形区滑动中性角的计算

With a high water contact angle of about 165.7 ± 0.3 ° and a low sliding angle ( less than 5 °). Water droplet moved easily on the surface.

该复合膜表面具有超疏水性，与水的接触角高达165.2°，且滚动角（

The paper presents the algorithm for the minimal work flow transmission angle γ gmin by the means of the motional analysis of crank sliding block mechanism.

通过对曲柄滑块机构的运动分析，得出了最小工作行程传动角γgmin的求法。

The sliding and overturning stability design methods of caisson breakwaters are classified into three categories of the static design method, the dynamic design method with no sliding and rocking motion allowed and the dynamic design method for controlling sliding distance and rocking angle.

将沉箱式防波堤滑移和倾覆稳定性设计方法分为三类：静力设计方法、不允许沉箱出现滑移和摇摆角的动力设计方法、控制沉箱滑移量和摇摆角的动力设计方法。

The paper presented some measures for slope-sliding control and recommended optimal slope angle for production stage.

文章相应提出了整治滑坡的措施和推荐生产用最佳边坡角.

The second part focuses on the nonlinear variable structure controlling law of AUVs in diving plane and steering plane when the attacking angle and sliding angle is very little.

针对水下航行器非线性强、模型参数获取困难的问题，提出了非线性变结构控制。

Currently the classification of landslides is quite complicated on which the research is mainly on the theory. The Paper identifies three major factors for classifying landslides including sliding thickness, rock properties of sliding bed and sliding angle concluding for the first time 12 categories of landslides.

针对目前滑坡分类复杂且侧重于理论研究的现状，通过以滑面深度、滑床岩性、滑面倾角三要素为分类重点，首次从治理角度上对滑坡进行新的分类，共划分出12种滑坡类型；

The paper introduces the designs of best transmission angle of crank sliding block mechanism for candy packaging machine controled by computer.

介绍了一种四杆机构设计方法，据此设计的四杆机构能够满足最佳传动角条件并保证预期机构类型。

A Riccati differential equation which unites the oblique rotary tiller blade dynamic sliding cutting angle and curve was deduced.

把斜置旋耕刀的动态滑切角与侧切刃曲线统一于黎卡提（Riccati）微分方程中。

The swinging angle detection of outside ball basket by using hydraulic drive system and sliding displacement detection of inside ball basket is indirectly achieved by detecting swinging angle and computus.

其中外球笼的摆角检测是用液压传动系统来实现的，而内球笼滑移量的检测则是通过检测其摆角来间接计算的。

By means of effort analysis of moving blade on PCC ⅳ 15.0S chopper, the relations between the corner and the sliding cutting angle 、 the vice angle and the pressure 、 the sliding cutting pressure and the resistances are studied in this paper;

通过对PCCⅣ15.0S型青饲切碎机动刀片刃口的受力分析，探讨转角a与滑切角t、推挤角x、压力T、滑切力N和阻力P的关系；